17 Manufacturing Job Openings Within 50 mi. of Barrie, ON

Displaying results 1 - 15 of 17
Aerotek

Mechanical Assembler

Aerotek - Richmond Hill, Canada
Mechanical Assembler Our client, a manufacturing company spealizing in industrial valves and piping in the Richmond Hill area, is looking for a mechanical assembler to join their team on an immediate basis. The responsibilities for this position include, but are not limited to the following duties: -Complete assembly of components to customer specific...
Application Deadline: None
Aerotek

Production Supervisor

Aerotek - Calgary Region, Canada
Our client is currently seeking a Production Supervisor for one of our major Production &Manufacturing clients. Our client is one of North America's leading manufacturers of corrugated and consumer packaging. Based in Atlanta, Ga., the company operates approximately 200 manufacturing facilities, primarily in North America. Since its founding in 1936,our client has focuse...
Application Deadline: None
Aerotek

Pipefitter- Bench Fitting

Aerotek - Calgary Region, Canada
This is a position for one of our clients based out of their Calgary fabrication shop for Bench Fitters. In this position you will be roll fitting and welding. The main pipe can be turned by a rolling machine and the fitter will be measuring out the required equipment needed. They will then tact welding the sheet metal before the B-Pressure welding completes the weld on site...
Application Deadline: None
Aerotek

Mechanical Designer

Aerotek - Scarborough, Canada
Our client, a large designer of complex office equipment, is seeking a mechanical designer. The ideal candidate will be able to prototype, design (create 3D models with Solidworks), and draft assemblies and components of mechanical devices. Experience interacting with clients and customers, creating bills of materials (BOM's), and selection of parts is a major requirement of this positi...
Application Deadline: None
Aerotek

Program Manager

Aerotek - Concord, Canada
Our client, an automotive manufacturer, is looking to hire a Program Manager on a permanent basis. Responsibilities include: *Program management throughout the entire product life cycle, from pre-acquisition through to end of production *Providing customer acquisition support for new programs *Primary point of communication interface to th...
Application Deadline: None
Aerotek

Production Worker

Aerotek - North York, Canada
General labours required for a company that is manufacturing various furniture for commercial use. Workers are required to do General Assembly and production work in the manufacturing facility. There will be lifting of up to 50 lbs in this job and standing for long periods of time. The facility can get hot with all the machines running and it is a faced pace environment. All interested ...
Application Deadline: None
Aerotek

Mechanical Assemblers

Aerotek - Concord, Canada
Candidates will be doing mechanical assembly of vacuums and dust extraction machines. They will be using hand tools and power tools like: drills, wrenches, cordless drills, insert gun, sanders, ratchets, screw drivers, etc. Candidates will do full assembly of the unit eventually, but will start with attaching latches, handles, putting sealent on it, and doing one step in...
Application Deadline: None
Aerotek

Off loader

Aerotek - Brampton, Canada
(position will include 2-3 weeks of training on days with supervisor) 1. WIll be incharge of moving all material needed for the production lines i.e (chemical drums, powder, skids) 2. Clean and monitoring of print cyclinders ink trays and dies. 3. Will relieve operators for breaks and perform quality inspection on finished product. 4.Will be e...
Application Deadline: None
Aerotek

Mechanical Assemblers - 5 immediate openings!

Aerotek - Concord, Canada
Dear Candidates, *PLEASE REPLY WITH RESUME TO EMAIL DISPLAYED BELOW* Our client has 5 immediate openings for Mechanical Assembly Workers. Shift: Days. Potential to switch to afternoons. Expectations: Candidates will be doing mechanical assembly of vacuums and dust extraction machines. - Mechanically inclined (experience wit...
Application Deadline: None
Aerotek

Press Operator

Aerotek - Brampton, Canada
Plastic extrusion press Machine Operator ability to lift 50 pounds fast paced environment About Aerotek: Aerotek, headquartered in Hanover, Md., is a leading provider of technical, professional and industrial staffing services. Established in 1983, Aerotek is an operating company of Allegis Group, the large...
Application Deadline: None
Aerotek

Lead Designer

Aerotek - Vaughan, Canada
Our client is a manufacturer of custom retail fixtures, components and visual merchandising products for architectural millwork and retail environment contractors, they are looking for a Lead Designer to join their team. The successful candidate will be resposnible for the following: Communicate with complex clients to develop a concept and see things through from...
Application Deadline: None
Aerotek

CNC Machine Operator

Aerotek - Brampton, Canada
Operate CNC machines (lathe) Set up parts by following established procedures Setup/Program and/or edit CNC machine following procedures Assist with root cause analysis Able to read and understand GD&T symbols for parts made (First off inspection) Able to use and replace appropriate tooling and utilize measuring tools as it applies to job Able to in...
Application Deadline: None
Aerotek

EDM Technician

Aerotek - Brampton, Canada
The person of this role is responsible for setting up and operating Electrical Discharge Machining (EDM) equipment used to cut tools and components. The EDM Technician will be responsible for machining a quality product that meets company and customer expectations, while maintaining a safe and healthy work environment. Duties & Responsibilities Determin...
Application Deadline: None
Aerotek

Project Manager

Aerotek - Pickering, Canada
Our client, located in Pickering is seeking a project manager for a one-year contract with the possibility of an extension and/or being taken on with the company permanently. The target goal/responsibility of this position is: - To optimize the manufacturing facility to increase productivity and output Job responsibilities include: - Devel...
Application Deadline: None
Aerotek

Materials Manager

Aerotek - Scarborough, Canada
Our client requires a Materials Manager. It is a permanent position that offers significant long-term growth with a well-known and reputable multinational company. The scope for the available position is as follows: - Inventory Planning - Purchasing - Doing the above while aligning with the overall business direction with them, meeting cus...
Application Deadline: None
Displaying results 1 - 15 of 17