6,516 Job Openings Within 50 mi. of Dallas, TX (Page 2)

Displaying results 1 - 15 of 6,516
Aerotek

Building Engineer

Aerotek - Coppell, TX
Complies with all codes, regualtions, and company directives. Inspect all building systems including fire alarms, HVAC, and plumbing to make sure operation of equipment is running correctly. Will review assigned work orders and estimate time and materials needed to complete repairs. Will also be responsible for maintaing inventory. No supervisor responsiblities. No certifications required and n...
Application Deadline: None
Aerotek

HVAC

Aerotek - Dallas, TX
HVAC mechanic that will be hanging duct on a commercial job site. No certifications or medical monitoring required. Will need hard hat, safety vest, glasses. Aerotek, headquartered in Hanover, Md., is a leading provider of technical, professional and industrial staffing services. Established in 1983, Aerotek is an operating company of Allegis Group, the largest provider of staffing s...
Application Deadline: None
Aerotek

Maintenance Mechanic

Aerotek - Dallas, TX
Maintenance mechanic will be in charge of all heavy equipment in the facility. Candidate must have good mechanical skills with hydraulic and diesel equipment. Minor electrical and welding. Equipment to repair will be equal or similar to: -Concrete Mixers -Industrial Conveyers -Diesel Trucks -Cranes -Pneumatics, hydraulics, presses -Air tools, power tools -Welding fab...
Application Deadline: None
Aerotek

Repair Tech Lead

Aerotek - Coppell, TX
Duties and Responsibilities Team Lead to oversee other Repair technicians (total of 5 techs) * Daily/Weekly/Monthly and ad hoc reporting to Upper management * Duties may include testing, refurbishment, repairing and initial programming of various ATM assemblies. * Must be able to load Software on Hard Drive * Must have a basic understanding...
Application Deadline: None
Aerotek

Assembler

Aerotek - Grand Prairie, TX
Looking for an assembler with strong mathematical skills (ex. pre-calculus, algebra) and mechanical aptitude. Additionally, manual dexterity and good eye to hand coordination are required. 1st shift position. Aerotek, headquartered in Hanover, Md., is a leading provider of technical, professional and industrial staffing services. Established in 1983, Aerotek is an operating company o...
Application Deadline: None
Aerotek

Inventory Specialist

Aerotek - Plano, TX
A large manufacturing company in the Plano, TX area is looking for an inventory specialist. Duties will envolve Performing Cycle Counting with the stockroom employees and reconciling the inventory. Experience working with MS Excel and MS Word is required along with strong computer skills and ability to run reports and track down missing inventory. Aerotek, headquartered in...
Application Deadline: None
Aerotek

Assembler

Aerotek - Plano, TX
Top Three Skills: Assembly RTV mechanical Job Description: Assembler will be applying RTV and Permanent Lacing on assemblies prior to putting Work Environment: work at various stations on a line and be crossed trained Qualifications: Previous mechanical assembly/hand stuffing experience preferred Must be able to read MP...
Application Deadline: None
Aerotek

Assembler Solder

Aerotek - Plano, TX
Hand soldering componets to boards, soft leading, lacing, RTV application.Should be able to solder PTH(plated through hole) and SMT(surface mount technology) Using Scope Magnification of 30X-40X power a must. Includes SMT. Fine pitch gull wing leads as well as fine pitch J leads and small chip components and Cylindrical end components and able to solder wires to terminal. ...
Application Deadline: None
Aerotek

Assembler - Solder

Aerotek - Plano, TX
Top Three Skills: Solder Tech Electronics Manufacturing Job Description: Hand soldering components to boards Soft leading, lacing, RTV Application Work Environment: Clean room environment Qualifications: 2-4 years hand soldering experience Computer knowledge Performance Expectations: Production go...
Application Deadline: None
Aerotek

Facilities Tech

Aerotek - Fort Worth, TX
PURPOSE: Repairs, modifications and preventative maintenance on building and facilities equipment, fixtures and systems (Electrical). PRINCIPLE ACCOUNTABILITIES / DUTIES: * Responds to service calls and in-house repairs throughout the facility. * Troubleshoots, responds to work orders, repairs systems and equipment. * Installs office fixtures and performs work in variou...
Application Deadline: None
Aerotek

MIG Welder

Aerotek - Fort Worth, TX
Seeking MIG welders for 2nd shift. MIG Welders will be working with thin gauge up from 1/8" to 1/2" inch Mild Steel. Special projects require up to 1" thick steel. They will be using .035 wire. Have the ability to read/understand blue prints, set up their own welding and have the ability to fit-up their own parts using fixtures. Welds need to be clean, smooth and without s...
Application Deadline: None
Aerotek

Maintenance Technician

Aerotek - Dallas, TX
Large manufacturing company seeking experienced Maintenance Technicians. Individuals must have experience troubleshooting and repairing conveyor systems and chain driven equipment. Will be required to diagnose and repair any mechanical or electrical issues and then perform repairs as necessary. Preventative maintenance will also be a routine requirement. Must be able to perform electrical and m...
Application Deadline: None
Aerotek

Tooling Engineer

Aerotek - Grand Prairie, TX
Aerotek is looking for a Manufacturing Tooling Engineer for a client in the DFW area. Below is more information about the positong. 1. From customer received drawings, designs tooling to produce the component parts to the customers print using the quote package, department standards and work experience as a guideline. 2. Drafts various types of parts from customer prints and sket...
Application Deadline: None
Aerotek

Assembler

Aerotek - Fort Worth, TX
Candidate will work first shift 6am-4pm, overtime will be mandatory (10-15hrs). They will be responsible for breaking down hydraullic frac units and rebuilding according to customers specifications. Must have 2-3 years of hydraulic experience and be able to read blueprints. Must have their own tools. Aerotek, headquartered in Hanover, Md., is a leading provider of technical, professi...
Application Deadline: None
WM
Veteran-icon_2

Plant Maintenance Mechanic

WM - Garland, TX
Equal Opportunity Employer: Minority/Female/Disability/Veteran Other Possible Location: N/A Job Schedule: N/A Job Shift: 1st Shift Pay: N/A Travel: None Relocation: N/A Job Summary The Plant Maintenance Technician is responsible for monitoring and maintaining the operation of all plant systems and equipment. Including but not limited to baler...
Application Deadline: None
Displaying results 1 - 15 of 6,516
- Veteran committed job