ENGINEERING TECHNICIAN 1 Job Listing at Louisiana Department of State Civil Service in Other, LA (Job ID ldoscs-214936)
Job Title: ENGINEERING TECHNICIAN 1
Agency: DOTD-Engineering & Operations
Opening Date: Wed. 03/10/10
Closing Date/Time: Continuous
State Salary Range: $10.38 - $19.06 hourly
$1,800.00 - $3,304.00 monthly
Agency Hiring Range: Min: Max:
Job Type: Classified
Location: Other, Louisiana
Print Job Information|Apply
Qualifications Benefits Supplemental Questions
No specialized experience or training is required.
DISTRICT 02 - BRIDGE CITY
JOB NUMBER: 0276-02-DISTRICT
Districtwide Recruitment for Jefferson, Orleans and St. Charles Parishes
No current vacancies at this time. This posting is for recruitment purposes only.
Applications remain active for 90 days. If you wish to be considered after the 90 days, please reapply.
To apply for this vacancy, click on the "Apply" link above and complete an electronic application which can be used for this vacancy as well as future job opportunities.
Applicants who do not wish to apply online can submit a completed Civil Service application (application can be found by clickinghere)to Jacquel Flagg, Human Resources Analyst C, 1440 Highway 90, Bridge City, LA ,70094 or fax completed application to (504) 437-3263. Application must have the job title and job number on it. All supplemental questions must be answered and submitted with application. Any applications that do not contain this information will be rejected.
DOTD/STATE EMPLOYEES: All qualified and interested permanent.
DOTD/STATE employees may apply. A valid Civil Service score for ENGINEERING ASSISTANT (SERIES 9111) may be required.
DOTD EMPLOYEES: Refer to appropriate EDSM directive for required structured training requirements and PPM # 59 Workforce Development on training guidelines.
NEW HIRES: All qualified and interested applicants may apply. A valid Civil Service score for ENGINEERING ASSISTANT (SERIES 9111) is required.
Applicants without current test scores can apply to take the testhere.
For more job specific information, please contact Susan Davis, Office Coordinator, 504-437-3147.
Function of Work:
To participate in on-the-job training to learn basic, routine sub professional engineering tasks, as defined in the Examples Of Work Section.
Level of Work:
Close from an Engineering Technician 5, 6, 7, a professional engineer or manager of the agency served.
Location of Work:
May be used by all state agencies.
Differs from higher level engineering technicians by the focus on learning basic methods, techniques and procedures and by the presence of detailed instructions and close supervision.
Examples of Work:
Learns basic procedures of utilizing Computer Aided Design and Drafting (CADD) to develop simple details required in plan preparation.
Learns basic drafting skills and techniques. Performs basic math computations and measurements. Becomes familiar with procedures, rules and regulations.
Scans completed bid/contract documents into Visual Info. Performs final quantity checks on all bid items prior to each letting.
Assists in the distribution of construction proposals and plans to prospective bidders by entering pertinent data into the computerized bid system. Learns to verify license numbers and check for disqualified contractors. Assists with the maintenance of TOPS (Tracking of Projects System).
Performs final quantity checks on all bid items prior to each letting. Distributes various documents within and outside of the Department. Archives completed construction bid proposals and contract documents into Visual Info.
DATA COLLECTION & ANALYSIS:
Assists higher level technicians in collecting and extracting short session traffic volume and vehicle classification field data. Assists in the development of a daily work plan to install and remove the recorders from assigned monitoring sites.
Learns to digitize and create transportation-related features using field collected data, aerial and satellite imagery and other GIS data sets. Learns to perform accuracy checks and quality control of data and edits data to produce various maps and graphic products.
Performs routine inspection tasks such as writing haul tickets, weighing asphaltic materials, assisting in asphalt plant inspections. Collects and totals quantities from haul tickets for materials delivered by truck to construction projects.
Becomes familiar with Department procedures, policies, standards and specifications as relate to the processing of construction-related documents such as partial and final estimates, test reports, and materials audits (2059); assists higher-level technicians in a Project or District Laboratory Engineer's office engaged in these tasks.
Assists the District Laboratory field crew in handling augers, taking routine samples, and maintaining equipment.
Assists more senior inspectors with measurements or field tests. Assists more senior inspectors in conducting bridge inspections.
Makes concrete cylinders.
Plots and drafts engineering/surveying drawings using personal computer and drafting software.
Serves as rod-person/prism person in land survey crew. Loads/unloads, cleans and maintains survey equipment.
Conducts traffic counts, speed studies and general data collection.
LOCATION AND SURVEY:
Trains on basic photo-interpretation instruments.
Assists with indexing photography.
Becomes familiar with and begins to utilize Computer Assisted Design and Drafting (CADD) software to create drawings.
Becomes familiar with surveying equipment, field terminology and Department/Section procedures.
Learns basic computer skills to be used in the processing of bridge reports from District Headquarters.
Learns basic procedures of the inventory and inspection database system for the in-service bridges on and off the state system.
Trains in the use of existing data collection and data review equipment so as to contribute to the verification of the completeness and quality of pavement and bridge condition data.
Acquires specialized skills in PCs and other pavement/bridge management technical equipment through course work and on-the-job training.
Learns basic testing procedures and operation of testing equipment for quality assurance testing of construction and maintenance materials such as soils, aggregate, asphalt binders, geo-textiles, cement, metals, soil additives, etc.
Learns basic testing equipment repair procedures and techniques.
Performs data entry of test data into the statewide automated testing system.
Performs basic mathematical calculations to determine material properties.
Learns basic sampling procedures and operation of drilling equipment for obtaining deep soil boring samples.
Performs a limited range of assignments such as loading and unloading vehicles for travel to and from job sites, handling drilling stems, preparing bentonite slurries and basic maintenance of equipment.
PUBLIC WORKS AND WATER RESOURCES:
Assists in preparing Advisory Permit responses to government agencies that grant permits. Prepares correspondence from the Water Resources Permit Advisory Unit for mailing. Assists in maintaining Permit Records by means of manual filing and Automated Document Management.
Assists with water dam safety inspections, well registration, licensing forms, and data collection/input. Assists in the review of requests for right-of-way submitted by the U.S. Army Corps of Engineers.
Conducts basic engineering research tests in area of expertise under direct supervision of lead worker/engineer supervisor team to support specific research tasks and studies.
Learns basic field and laboratory techniques and procedures to enhance safety and knowledge.
Serves in a training capacity, learning basic procedures of utilizing Computer Aided Design and Drafting (CADD) to develop simple details required in plan preparation.
Learns basic drafting skills, techniques and basic math computations. Obtains training in computer-aided drafting, basic road design detailing and related computer applications.
TRAFFIC ENGINEERING AND SERVICES:
Becomes familiar with and begins to utilize CADD software to create drawings; obtains training in CADD, basic road design detailing and related computer applications. Learns basic drafting skills, techniques and basic math computations.
Conducts traffic counts, speed studies and general data collection.
Learns basic testing procedures and operation of testing equipment for quality assurance testing of construction and maintenance. Learns basic sampling procedures for testing traffic marking and sign sheeting materials.
TRANSPORTATION PLANNING AND SAFETY:
Learns to prepare computerized Crash History Data reports. Learns to review Police Crash reports sent to DOTD and mark the reports for the location of the crash.
Apply on Company Website
Get alerts for jobs like this:
Get jobs like this tweeted to you:Engineering jobs in Los Angeles, CA
View similar jobs:
EL Monte RV Center - Santa Fe Springs, CA
AT&T - Camarillo, CA
Mechanical Engineering Technician
Kelly Services - Irwindale, CA
Locate this job: